Allworx 9212 Guia Do Utilizador

 

300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com 

© 2008 Allworx. All rights reserved 

Revised: May 28, 2008 

 

Page 10 

5 Phone 

Operation 

5.1  Placing a Call 

•  Outbound calls can be placed by pressing the following PFKs: 

o 

Call Appearance: can be used to place extension-to-extension calls or to obtain an outside line 
(must dial 9 first). 

o 

Line Appearance: seizes the outside line without dialing 9 first. 

o 

Speed Dial: automatically dials the programmed number 

5.2  Receiving a Call 

•  Inbound calls can be answered with the following PFKs (when flashing): 

o 

Call Appearance: can receive either an extension-to-extension call or an outside line directed to 
an extension assigned to the phone. 

o 

Line Appearance: can receive inbound calls from the outside line. 

o 

Call Monitor 

o 

Call Queue  

Note:   Unless configured otherwise, incoming calls to your phone will ring the audible indicator and flash one 

of the Call Appearance PFKs. 

 

5.3  Ending a Call  

Release a call by using one of the following:  

•  Place receiver back on hook. If using the speakerphone or headset press the SPEAKER button.  
•  Press another PFK. 

o 

If a second call is coming in on another PFK, pressing that PFK will end the current call and 
answer the incoming call (unless auto on hold is enabled). 

•  Press the RELEASE button to end a call and start a new call. 

5.4 Headset  

1.  Plug the cable for the headset into the headset jack on the back side of the phone.  

2. Press 

the 

SPEAKER button. (You cannot use the speakerphone and headset at the same time). 

3.  When finished with the call, press the SPEAKER button to disconnect.  

A PFK can be created to activate the headset instead of using the SPEAKER button. The PFK has to be setup 
by the System Administrator.