Aroma ahu-4002 Guia Do Utilizador

Página de 4
Operating and Cleaning Instructions
How to use:
• Always place this unit on a firm, flat and level surface. 
The humidifier may not work properly on uneven surfaces.
Filling the tank:
1. Remove tank from base by grasping handle and pulling upward
2. Turn water tank upside-down and unscrew the fill cap by turning it counter clockwise
3. Fill tank with cool, distilled or tap water.
• Distilled or softened water preferred. Minerals in tap water may cause a white dust to appear around unit and 
on your furniture.
• Water temperature should not be to hot or to cold. Extreme temperatures damage unit.
4. Replace the fill cap by turning it clockwise. (Do not over tighten)
5. Return tank to base and let water settle for a few minutes.
Power:
1. Plug power cord into a 120V AC wall outlet only.
2. Set rotate switch to desired position.
• Ion=Negative ions will be emitted which can eliminate dust particles in the air
• Ion & Moisture=Rapidly adds moisture to the air while Ions eliminate dust particles for a clean, fresher air.
3. Aim nozzle away from the furniture and walls for proper air flow
4. Turn rotate switch to off when finished.  Will operate approximately 12-14 hours in continuous use.
• Add water indicator light will illuminate when tank is empty but motor will still run.
• Do not leave water in tank for prolonged period.  This can encourage bacteria growth.
How to Clean:
• We recommend cleaning the humidifier weekly during use, or more often if you have hard water, before storing 
or after unit has been stored for a long time.  Use a mild bleach and water solution, never use detergent.
1. Remove tank from base by grasping handle and pulling upward
2. Turn water tank upside-down and unscrew the fill cap by turning it counter clockwise
3.. Empty reservoir
4. Fill water tank with 1 teaspoon of household bleach and water. Let stand for 20 minutes.
5. Use a brush to clean off mineral deposits and debris from nebulizer and water sensor
• Do not scrape or clean with metal tools
6. Empty reservoir and rinse with water until bleach odor is gone.
7. Make sure all parts are thoroughly dry before storing.
Important Safety Information
READ ALL INSTRUCTIONS BEFORE 
USING YOUR MINI DEHUMIDIFIER. 
WARNING - To reduce the risk of fire, electric shock, or injury; Use only as directed.
1.
Always have water in the water tank when operating unit.
2.  Use only clean, cool, tap water to fill tank (softened or distilled water is recommended, if tap water is hard).
3.
To avoid white dust, you may use distilled, or a demineralization cartridge.
4.
Be sure the filling cap of the tank is firmly tightened.
5.
Always have the mist nozzle and the mist chamber in place while the unit is operating.
6.
Use only 120V AC outlet.  As with any electrical device, plug and unplug unit with dry hands only.
7.
Never operate unit with damaged cord or plug
8.
Always place unit on a flat, level surface away from direct sunlight.  Keep cord away from heated surface and
areas where it could be walked on or tripped over.  Note: the mist will automatically shut off when the tank is
empty; however, the fan will continue to run.
9.
Unplug the unit when not in use and whenever you clean or move the unit.
10. Do not add medication of any type into the nozzle, base or water tank.  Do not cover any opening of the unit or
insert objects into any openings.
11. The unit should not be left unattended in closed rooms as air could become saturated and leave condensation on
walls or furniture.  Always leave room door partly open.
12. When cleaning inside of unit, keep water away from the air outlet.  Exterior may be wiped with a damp cloth
when unit is unplugged.
13. Do not tilt or tip unit or attempt to empty or fill it while it is operating.
14. Do not use detergent to clean any water containing parts of the unit.  Detergent film dissolved in the water
supply can interfere with the output of the unit.
15. The nebulizer (ionic transducer) is highly sensitive.  Keep this important part clean and treat gently.  Do not
touch the nebulizer while the unit is operating, as possible burns could result.  Do not touch the nebulizer with
bare fingers.  Any residue on the metal will reduce mist output.
SAVE THESE INSTRUCTIONS!