Roland V-Synth GT Guia De Configuração Rápida
14
02
About the panel
Performance controller area
Performance controller area
In this area you’ll fi nd the controllers that you can operate to modify the sound while you play.
The result that each controller has will depend on the patch.
11.
The V-Synth GT’s panel contains numerous buttons and knobs, but we can broadly group these
into three areas. We’ll describe each of these below.
For details on what each control actually does, refer to the “Owner’s Manual.”
3
Display area
2
Edit area
1
Performance controller area
1 ft. (approx.)
D Beam
By moving your hand above
the D Beam you can apply various
eff ects to the sound.
For details, refer to “Using controllers
to modify the sound” (p. 26).
the D Beam you can apply various
eff ects to the sound.
For details, refer to “Using controllers
to modify the sound” (p. 26).
Time Trip pad
By rubbing your fi ngertip on the
surface of this pad you can ap-
ply various eff ects to the sound.
For details, refer to “Using
controllers to modify the sound”
(p. 26).
surface of this pad you can ap-
ply various eff ects to the sound.
For details, refer to “Using
controllers to modify the sound”
(p. 26).
Control knobs
By turning these knobs you can apply various
eff ects to the sound.
eff ects to the sound.
When the [LEVEL] or [PAN] buttons
are lit, you can use the C1 knob to
control the level or pan of the lower
tone, and the C2 knob to control
the level or pan of the upper tone.
are lit, you can use the C1 knob to
control the level or pan of the lower
tone, and the C2 knob to control
the level or pan of the upper tone.