Roland v-synth xt Manual Do Proprietário
129
Settings Common to All Modes (System Mode)
Settings Common to All Modes (System Mode)
E1 - E8 ExtCC (E1–E8 External CC)
fig.05-20_50
E1–E8 Assign
Specifies the MIDI controller number that will be transmitted by
movements in the E1–E8 knobs.
movements in the E1–E8 knobs.
Value
OFF:
No message will be transmitted.
CC01–31, 33–95:
Controller numbers 1–31, 33–95
If you want to use the E1–E8 knobs to transmit MIDI to an
external device, press the [CTRL] button to access the Control
screen and turn < External Control > “ON” (p. 63).
external device, press the [CTRL] button to access the Control
screen and turn < External Control > “ON” (p. 63).
V-LINK Settings (V-LINK)
Tx
fig.05-10_50
MIDI Channel (V-LINK MIDI Channel)
Specifies the channel used to transmit MIDI messages for V-LINK
control.
control.
Value:
1–16
Audio (V-LINK Audio Switch)
Specifies whether sound from the externally connected video device
will be played (ON) or not played (OFF).
will be played (ON) or not played (OFF).
Value:
OFF, ON
Palette Local Sw
(V-LINK Patch Palette Local Switch)
(V-LINK Patch Palette Local Switch)
Specify whether you will press PATCH PALETTE NUMBER [1]–[8]
in V-LINK mode to switch patches (ON) or not (OFF)
in V-LINK mode to switch patches (ON) or not (OFF)
Value:
OFF, ON
V-SYNTH_XT_e2 129 ページ ２００５年３月２３日 水曜日 午後４時３９分