Roland v-synth xt Manual Do Proprietário
139
Connecting to Your Computer via USB (USB Mode)
Connecting to Your Computer via USB (USB Mode)
Transferring Files to or from Your
Computer (Storage Function)
By connecting the V-Synth XT with your computer via a USB cable,
you can transfer files such as projects, patches, and wave data from
internal memory or a memory card to and from the hard disk or
other media of your computer, in order to back up your data.
you can transfer files such as projects, patches, and wave data from
internal memory or a memory card to and from the hard disk or
other media of your computer, in order to back up your data.
You can use software on your computer to edit wave data you’ve
created on the V-Synth XT. Conversely, wave data that you’ve
created on your computer can be used on the V-Synth XT.
created on the V-Synth XT. Conversely, wave data that you’ve
created on your computer can be used on the V-Synth XT.
In this way, USB Storage function lets you transfer files such as patch
and waves to or from a connected computer.
and waves to or from a connected computer.
Never connect or disconnect the USB cable or turn off the power
while data is being transferred.
while data is being transferred.
Windows Users
●
Windows XP/2000/Me or later Users
Connecting the V-Synth XT to Your
Computer
Computer
1.
Make sure that the power of the V-Synth XT is turned off.
2.
Start up your computer.
3.
Connect the V-Synth XT and your computer using a USB
cable.
fig.07-02.e
4.
Turn on the power of V-Synth XT.
5.
If you are using a memory card, insert that memory card into
the PC CARD slot.
6.
Press [MODE] to access the V-SYNTH XT MODE MENU
window.
7.
Touch <USB>.
The USB Storage screen appears.
fig.07-03_50
For the rest of the procedure, read either “Windows Me/2000/
XP users” or “Macintosh users” as appropriate.
XP users” or “Macintosh users” as appropriate.
Windows users:
Macintosh users:
USB Connector
USB cable
USB
V-Synth XT
Computer
POWER
V-SYNTH_XT_e2 139 ページ ２００５年３月２３日 水曜日 午後４時３９分