Roland v-synth xt Manual Do Proprietário

 

This effect features a pair of the same flanger circuits used in the 
BOSS compact flangers, connected in parallel for stereo input. This 
adds a particular metallic-sounding modulation to the source sound.

 

fig.MFX-21

 

This is a flanger in which the flanger pitch changes in steps. The 
speed at which the pitch changes can also be specified in terms of a 
note-value of a specified tempo.

 

fig.MFX-22

 

Type

NORMAL, HI-
BAND

Selects the model of flanger sim-
ulated.
NORMAL: Normal type (BOSS 
BF-2)
HI-BAND: High-Band type 
(BOSS HF-2). Setting HI-B raise 
the flanging sound one octave 
above that at the NORM.

Manual

0–127

Sets the center frequency for the 
effect.

Depth #1

0–127

Sets the depth of the swelling of 
the flanger sound.

Rate #2

0.05–10.0 Hz, 
note

Adjusts the modulation speed of 
the flanger effect.

Resonance

0–127

Sets the intensity of the flanger’s 
effect.

 

Phase

0–180 deg

Specifies the spaciousness of the 
flanger sound.

Feedback Mode NORMAL, 

CROSS

Specifies the input destination to 
which the flanger sound will be 
returned.
NORMAL: The left flanger 
sound will be returned to the left 
input, and the right flanger 
sound to the right input.
CROSS: The left flanger sound 
will be returned to the right in-
put, and the right flanger sound 
to the left input.

Feedback

-98– +98%

This setting makes the flanging 
sound of each of right and left 
channels return to the input of 
the opposite channel. Negative 
(-) settings will invert the phase.

 

Cross Mix Level -100– +100

This setting makes the flanging 
sound from each of the right and 
left channels mix it with the 
flanging sound of the opposite 
channel. Negative (-) settings 
will invert the phase.

Ps Low Freq

50–4000 Hz

Frequency of the low range

Ps Low Gain

-15– +15 dB

Gain of the low range

Ps Hi Freq

2000–20000 Hz

Frequency of the high range

Ps Hi Gain

-15– +15 dB

Gain of the high range

L

R

Flanger

2-Band

EQ

 

Pre Dly Time

0–50.0 ms

Specifies the time delay from the 
original sound until the flanger 
sound is heard.

Rate #1

0.05–10.0 Hz, 
note

Specifies the modulation fre-
quency of the flanger sound.

Depth

0–127

Specifies the modulation depth 
of the flanger sound.

Feedback

-98– +98%

Adjusts the proportion of the 
flanger sound that is fed back 
into the effect. Negative (-) set-
tings will invert the phase.

Phase

0–180 deg

Specifies the spaciousness of the 
flanger sound.

Step Rate #2

0.05–10.0 Hz, 
note

Specifies the frequency of pitch 
change.

Flanger Level

0–127

Volume of the flanger sound

Ps Low Freq

50–4000 Hz

Frequency of the low range

Ps Low Gain

-15– +15 dB

Gain of the low range

Ps Hi Freq

2000–20000 Hz

Frequency of the high range

Ps Hi Gain

-15– +15 dB

Gain of the high range

L

R

2-Band

EQ

Step

Flanger

V-SYNTH_XT_e2 175 ページ ２００５年３月２３日　水曜日　午後４時３９分