Roland v-synth xt Manual Do Proprietário

Página de 212
 
64
Playing in Patch Mode
 
Playing Arpeggios 
 
(Arpeggiator)
 
The V-Synth XT comes with an 
 
arpeggiator
 
 that can play arpeggios 
automatically. Once you turn on the arpeggiator, the keys you press 
will automatically be played as an arpeggio.
 
1.
 
 
2.
 
Press Arpeggio <ON/OFF> to make the indicator light.
 
The arpeggiator is turned on.
 
fig.Q-17
 
3.
 
Play your external MIDI keyboard.
 
The V-Synth XT arpeggiates what you’ve played.
 
4.
 
To adjust the tempo of the arpeggio, touch <TEMPO> in the 
location shown below, and turn the [VALUE] dial.
 
Turning the dial toward the right makes the tempo faster, and 
turning it toward the left makes the tempo slower.Hold down 
[SHIFT] as you move the VALUE dial to increase value 
increments to make large value changes more quickly.
 
5.
 
To finish listening to the Arpeggio, press Arpeggio <ON/
OFF> again so its indicator turns off.
 
Holding an Arpeggio
 
By using the following procedure, you can produce arpeggios even 
without continuing to press the keyboard.
 
1.
 
Press Arpeggio <ON/OFF> to turn the Arpeggiator on.
 
2.
 
Press Arpeggio <HOLD> to make the indicator light.
 
3.
 
Play the MIDI keyboard.
 
4.
 
If you play a different chord or notes while the arpeggio is 
being held, the arpeggio will change accordingly.
 
5.
 
To cancel Arpeggio Hold, press Arpeggio <HOLD> again.
 
When Using a Hold Pedal
 
If you play an arpeggio while pressing the hold pedal, the arpeggio 
will continue to be played even if you release the keyboard.
 
1.
 
Connect a pedal switch (DP series) to the HOLD PEDAL jack 
of your external MIDI keyboard.
 
2.
 
Press Arpeggio <ON/OFF> to turn the Arpeggiator on.
 
3.
 
Play the keyboard while pressing the hold pedal.
 
4.
 
To play another chord, release the pedal, press it again as 
you play the next chord.
V-SYNTH_XT_e2 64 ページ 2005年3月23日 水曜日 午後4時39分