Roland SA-300 Manual Do Proprietário
9
Names of Things and What They Do
7. LOW BOOST Button
This switches the low boost effect on and off.
When this is switched on, the low-frequency range is
boosted.
boosted.
8. WIDE Button
This switches the wide effect on and off.
When this is switched on, the sonic image extends
beyond the SA-300’s speakers, providing an effect that
seems to envelop the listener in sound.
beyond the SA-300’s speakers, providing an effect that
seems to envelop the listener in sound.
9. LEVEL Indicator
This indicates the MASTER output level.
10.
EQUALIZER
The SA-300 includes a 3-band equalizer.
LOW Knob
This adjusts the tone in the low-frequency range.
MIDDLE Knob
This adjusts the tone in the middle-frequency range.
HIGH Knob
This adjusts the tone in the high-frequency range.
11.
PHONES Knob
This adjusts the headphone volume level.
12.
Headphone Jack
Connect headphones here.
* Be sure to turn the PHONES knob setting to 0 before
connecting or disconnecting headphones.
* The sound from the SA-300’s speakers is not muted when
headphones are connected.
13.
VOLUME Knob
This adjusts the overall volume output from the SA-300’s
speakers.
speakers.
14.SUBWOOFER ACTIVE Indicator
This lights when the subwoofer is connected to the
SPEAKER jack.
SPEAKER jack.
While the indicator is lit, the low-frequency response
with the subwoofer (SA-300W) connected is modified
accordingly.
with the subwoofer (SA-300W) connected is modified
accordingly.
15.POWER Switch
This switches the power on and off.
* Be sure to turn the MASTER VOLUME knob down to 0
whenever turning the power on or off.
* This unit is equipped with a protection circuit. A brief interval
(a few seconds) after power up is required before the unit will
operate normally.
operate normally.
MASTER