eMachines EL1320 Guia Do Utilizador

Chapter 3: Troubleshooting

34

You see a “Not enough memory” error 

message

•

Close all programs, then restart your 

computer.

Memory card reader

Drive letters for the memory card slots do not 

appear in the My Computer window

•

Reboot your computer.

Modem (cable or DSL)

•

See the documentation that came with 

your modem for additional 

troubleshooting information.

Modem (dial-up)

See also 

.

Your modem does not dial or does not connect

•

Make sure that the modem cable is 

plugged into the modem jack and not 

the Ethernet network jack. See your 

setup poster to make sure that the 

connections have been made correctly.

•

Make sure that your computer is 

connected to the telephone line and the 

telephone line has a dial tone.

•

Make sure that the modem cable is less 

than 6 feet (1.8 meters) long.

•

Remove any line splitters or surge 

protectors from your telephone line, 

then check for a dial tone by plugging a 

working telephone into the telephone 

wall jack.

•

If you have additional telephone services 

such as call waiting, call messaging, or 

voice mail, make sure that all messages 

are cleared and call waiting is disabled 

before using the modem. Contact your 

telephone service to get the correct code 

to temporarily disable the service. Also 

make sure that the modem dialing 

properties are set correctly.

MU0000000_eM_ENG_V09A3.book  Page 34  Wednesday, August 19, 2009  5:06 PM