Motorola accompli 008 Guia Do Utilizador
160 Data Synchronisation with PC
Performing Data Synchronisation
If a cable is to be used for the connection between the PC and the device, make sure a Motorola
Sync cable is connected to the COM port of the PC. Also, make sure the power plug is connected
to the other end of the Sync Cable (if the power plug is not connected, synchronisation may fail).
If Infrared connection is used for data synchronisation, make sure that IrDA is installed correctly.
Sync cable is connected to the COM port of the PC. Also, make sure the power plug is connected
to the other end of the Sync Cable (if the power plug is not connected, synchronisation may fail).
If Infrared connection is used for data synchronisation, make sure that IrDA is installed correctly.
A
Not all the PC's have Infrared capability.
1 Run the TrueSync
TM
software.
2 Tap
at the main menu to enter the Synchronise display.
Synchronize
Done
Synchronize Via:
Data Cable
InfraRed Link
12:26
3 If the serial cable is used, tap Data Cable. Phone will show “Connect Cable and Charger to
Synchronise” to start synchronisation.
4 Press OK to start TrueSync
TM
synchronisation.
5 If you are using Infrared connection, tap Infrared Link and phone will show “Looking for
Computer”. Synchronisation will start once the phone can detect the computer.
Synchronize
Done
Cancel
TrueSync
Looking for
Computer...
12:26
Synchronize
Done
Cancel
12:26
1000
3000
Cancel
TrueSync
Ready
If synchronisation was unsuccessful, error messages will be displayed.
! When encountering Low Battery, Interruption of Infrared beam connection, PC system
malfunctioning or Internet malfunctioning, Synchronisation will stop immediately and an error
message will be shown.
message will be shown.