Lenovo scrollpoint mouse Guia Do Utilizador
To start the Mouse Suite Software:
1.
1.
Click Start-->Settings-->Control Panel.
2.
The Control Panel window opens. Double-click the Mouse icon. (If you have already enabled Show
Mouse Icon in the system tray option in the Mouse Suite properties of the Control Panel, double-click
the Mouse icon in the Windows System Tray located in the lower right-hand corner of your screen.)
Mouse Icon in the system tray option in the Mouse Suite properties of the Control Panel, double-click
the Mouse icon in the Windows System Tray located in the lower right-hand corner of your screen.)
By default the mouse buttons are assigned various functions, such as primary Mouse Button, Context
Menu, and Quick/Auto scroll. You can customize or change these button functions. To customize the
function of each button, do the following:
1.
Menu, and Quick/Auto scroll. You can customize or change these button functions. To customize the
function of each button, do the following:
1.
Open the Mouse Suite Control Panel.
2.
Click the Buttons tab.
3.
On the Mouse Image, click the button you want to assign a new function, or select a button from the
Button list. The selected button will be displayed in the Button list and highlighted on the mouse
image.
Button list. The selected button will be displayed in the Button list and highlighted on the mouse
image.
4.
Select a function from the Function list (at least one mouse button must be designated as the Primary
Mouse Button).
Mouse Button).
5.
To reset your mouse buttons to the default setting, click Use Default.
6.
To confirm your button settings, click Apply.
For further information on customizing the settings click the Help button located in the lower right hand
corner of the Mouse Suite software interface.
corner of the Mouse Suite software interface.
Solving USB problems
This section contains information on solving problems with USB connectivity.
Note:
There have been some cases where a computer has USB connectors, but the BIOS does not support
them. Contact your computer manufacturer to find out how to upgrade the BIOS.
them. Contact your computer manufacturer to find out how to upgrade the BIOS.
The IBM 800 DPI Optical 3 Button ScrollPoint Mouse - PS/2 & USB does not respond.
v Make sure that your computer is turned on when you perform the installation. Try disconnecting, and
v Make sure that your computer is turned on when you perform the installation. Try disconnecting, and
re-connecting the mouse.
v Be sure you are not running Microsoft Windows 95 or Microsoft Windows NT Workstation. These
operating systems do not support USB connectivity for this device.
v If you have Microsoft Windows 98, Windows Me, or Windows 2000 Professional, make sure that all the
USB switches in the BIOS are enabled.
To check whether all the USB connectors are enabled, do the following:
– Access your computer Setup program during startup. Press F1, F2, or the Delete Key during startup.
To check whether all the USB connectors are enabled, do the following:
– Access your computer Setup program during startup. Press F1, F2, or the Delete Key during startup.
If you are unsure how to access the Setup program for your computer, see the documentation that
came with your computer, or contact the manufacturer.
came with your computer, or contact the manufacturer.
– Check the USB connectors in the setup program to sure that all USB connectors are functioning
properly.
If you are not sure how to use the Setup program for your computer, refer to the documentation that
came with your computer, or contact the manufacturer.
came with your computer, or contact the manufacturer.
USB (Universal Serial BUS) Controller Re-detection
The USB (Universal Serial BUS) Controller might not be properly installed in your computer.
1.
1.
Double-click My Computer.
2.
Double-click Control Panel.
3.
Double-click System.
IBM 800 DPI Optical 3 Button ScrollPoint Mouse - PS/2 and USB
3