AASTRA 480i Manual Do Utilizador

Softkey/Programmable Key Parameters

41-001129-00 Rev 09, Release 1.4.1

A-99

Configuration Parameters

Parameter – 
softkeyN states

Idle, Connected, Incoming, 
Outgoing
(in Web UI)

Operation->Softkeys and XML

aastra.cfg, <mac>.cfg

Displays the status of the phone when a softkey is pressed. You can 
enter multiple values (idle, connected, incoming, outgoing) for the 
"softkeyN state" parameter.

You must associate the softkeyN state parameter with a specific softkey. 
In the following example, the softkeyN states parameter is associated 
with softkey 12:
softkey12 type: speeddial
softkey12 label: voicemail
softkey12 value *89
softkey12 states: outgoing

Note: The IP phone idle screen condenses the softkeys.  So in the 
previous example, softkey 12 will appear in position 1 if no other softkeys 
are set.  A softkey type of "empty" does not display on the idle screen at 
all.

Text

For softkey types - Line, DND, speeddial, BLF, BLF List, XML, lcr, 
empty:
idle, connected, incoming, outgoing

For softkey type - Flash:
<blank>

For softkey type - Park:
connected

For softkey type - Pickup:
idle, outgoing

Valid values are:
idle

The phone is not being used.

The line currently being displayed is
in an active call (or the call is on hold)

The phone is ringing.

The user is dialing a number, or the
far-end is ringing.

Note: For softkey type, Pickup, values can be: idle, outgoing, 
idle outgoing.

softkey1 states: idle incoming outgoing
softkey2 states: connected