AASTRA 53i Guia Da Instalação
32 Model 57i CT IP Phone Installation Guide
Other Phone Features (57i CT Handset)
Other Phone Features (57i CT Handset)
Adjusting the Volume
Receiver Volume
Receiver Volume
When on a call and while not in any edit mode, the handset’s receive
volume can be adjusted using the volume control bar located on the side of
the handset. The display feedback is a speaker facing the right side of the
display with a rectangular box on the right side of the speaker. This box
indicates the relative volume of the receiver volume:
volume can be adjusted using the volume control bar located on the side of
the handset. The display feedback is a speaker facing the right side of the
display with a rectangular box on the right side of the speaker. This box
indicates the relative volume of the receiver volume:
lb
Alerter Volume
The volume control bar is also used to adjust the alerter volume while the
set is idle or while the set is alerting (ringing).
The alert volume icon indicates that the alerter volume is shown while the
volume bar shows the relative volume:
set is idle or while the set is alerting (ringing).
The alert volume icon indicates that the alerter volume is shown while the
volume bar shows the relative volume:
¬c
. The volume levels range
from off (
¬e
) to full volume (
¬a
)
Handset Status Light (LED)
The multifunction Handset LED provides the following user feedback:
Alerter Tones
The 57i CT cordless handset uses tones to provide information as follows:
Handset LED Status Description
Slow Flash
Slow Flash
Indicates you have a message(s).
Rapid Flash
Indicates an alerter tone is in progress. (See next
paragraph).
Intermittent Flash
Indicates the phone is set on "mute".
Intermediate Flash
Indicates the call is on hold.
ON solid
Indicates you are on an active call.
Handset Alerter Tones
Description
Alerting
Provides user selected alerter tones.
Battery
Provides "Battery low" warning tone every 3
minutes.
Hold
Provides "Flash ring" to notify of call on hold.