AASTRA 9316cw Manual Do Utilizador

Basic Installation

This section explains how to install your 9316CW telephone.

Connecting the handset cord

Connecting the line cord

Attach one end of the handset cord to the
handset and the other end to the handset jack.

Attach one end of the line cord to jack number
1 and the other end of the line cord to the wall
jack.

Connecting an optional fax
machine or modem

Connecting the power adaptor

Attach the line cord to jack number 2 and the
other end to the modem or fax machine. This
line cord is not supplied with the telephone.

Attach the power adaptor to the base of the
telephone where the warning symbol is
marked. Connect the power adaptor into the
closest electrical outlet.

To avoid potential electrical shock hazard to personnel or damage to the tele-
phone, use

only

the manufacturer-supplied equipment and installation proce-

dures. Specifically, use only 2 or 4 conductor modular teledapt plug/cords with
this product, and an AC transformer that is CSA/UL or CSA-NRTL/C approved
Class 2 level C, rated as follows:

For North American Markets mains nominal AC voltage 110-117V,

Input: 110/

117VAC, 50/60Hz, 10W and Output: 16VAC 250mA.

For International Markets mains nominal AC voltage 220-240V,

Input: 220/

240VAC, 50/60Hz, 10W and Output: 16VAC 250mA.
Substitution of non-approved equipment will void the Aastra Telecom Inc., war-
ranty. For more information call 1-800-574-1611.

P0857798 04 E UG 9316 Page 4 Wednesday, April 12, 2000 3:13 PM