AASTRA 9120 Guia Do Utilizador

You can change to another language by pressing I and V , then pressing 

*

. 

Press V until the desired language is displayed and then press 

*

 to set the language.

The number or name is too long. Numbers can be no longer than 24 digits and names 

can be no longer than 16 characters.

Make sure the power adaptor is plugged in to a working electrical outlet.

Make sure the handset cord is inserted securely into the jack and make sure the 

receiver volume is high enough.

The 9120 still operates as a regular telephone during a power failure. You can dial 

using the dial pad and you can receive calls, but the other keys and the display do not 

operate until the power is restored. Only Line 1 works in this situation.

Your telephone lines may be wired differently from the telephone jack. To have a 

service person correct the wiring, contact your local telephone company.

Check that the handset cord is placed in the channel between the stand and the 

telephone. See the illustration on page 7.

Some of the memory keys may be factory-programmed. These keys are locked and 

cannot be erased or reprogrammed.

Let the telephone ring at least twice before answering. If that doesn’t work, you may 

not have a Calling Line IdentiÞcation

†

 service. To subscribe, contact your local 

telephone company.

Until you subscribe to Calling Line IdentiÞcation

††

 service, your telephone does not 

record incoming calls.  Also, the Call Log option may be set to log no calls.  See 

 for information.

The caller may have an unknown number.

I have only one line connected to my phone, and I keep getting the message 
Check line cord. 

Check that the line cord is connected to a jack.

† 

This service may have a different name in your area.  Contact your telephone company for information.

†† 

This service may have a different name in your area.  Contact your telephone company for information.