Enterasys csx200 Manual Do Utilizador
Chapter 2: About the CSX200
2-12
CSX200 Installation Guide
System Passwords
You can control access to the CSX200 by the use of three passwords. Each password provides a
different level of access to the CSX200. The default password for each access level is pre-set to
public. The following definitions explain the levels of access:
different level of access to the CSX200. The default password for each access level is pre-set to
public. The following definitions explain the levels of access:
read-only —
allows reading of device parameters not including system passwords.
read-write —
Allows editing of some device configuration parameters not including changing
system passwords.
super-user —
Allows full management privileges. You must access the CSX200 at this level to
run QuickSET.
Simple Network Management Protocol (SNMP)
The CSX200 provides SNMP agent support for standard, and Enterprise-Specific Management
Information Bases (MIBs), and support for standard, and Enterprise-Specific SNMP Traps. SNMP
is also used internally for configuration of the CSX200. The active SNMP agent within the
CSX200 accepts SNMP requests for status, statistics, and configuration updates. Communication
with the SNMP agent occurs over the LAN or WAN connection. Any management application
using SNMP over
Information Bases (MIBs), and support for standard, and Enterprise-Specific SNMP Traps. SNMP
is also used internally for configuration of the CSX200. The active SNMP agent within the
CSX200 accepts SNMP requests for status, statistics, and configuration updates. Communication
with the SNMP agent occurs over the LAN or WAN connection. Any management application
using SNMP over
SNMP MIB Support
SNMP MIBs (Management Information Bases) are databases of objects used for managing and
determining the status and configuration of an SNMP-compliant device.
determining the status and configuration of an SNMP-compliant device.
The CSX200 supports the following SNMP MIBs:
•
MIB II RFC1213
•
RMON MIB RFC1271
•
DS1 and E1 MIB RFC1406 (Digital Signal Level 1 [T1/E1 interface types])
•
IETF Bridge MIB RFC1493
•
IP Forwarding MIB RFC1354
•
PPP LCP MIB RFC1471 (Point-to-Point Protocol, Link Control Protocol)
•
PPP IPCP MIB RFC1473 (IP Control Protocol)
•
PPP BNCP MIB RFC1474 (Bridge Network Control Protocol)
•
IPXCP MIB RFC1552