Enterasys csx150 Guia Do Utilizador
Small Office Remote Access Switch 273
C
ONFIGURING
IPX
IPX Triggered RIP/SAP
C
ONFIGURING
T
RIGGERED
RIP/SAP G
LOBAL
T
IMERS
U
SING
CFGEDIT
1.
Select Triggered RIP/SAP from the IPX Routing Menu.
2.
Select Global Triggered RIP/SAP Timers. A menu similar to the following will be displayed:
3.
Select the option you want to adjust.
4.
Enter the new value.
C
ONFIGURATION
E
LEMENTS
D
ATA
B
ASE
T
IMER
This timer starts when an update response is received. While this timer is running, the routes
learned from this router are still considered reachable, and advertised as such on other interfaces.
When this timer expires, the routes are considered unreachable and advertised as such until the
hold-down timer expires. Valid range for timer: 1 to 10,000 seconds; default: 180 seconds.
learned from this router are still considered reachable, and advertised as such on other interfaces.
When this timer expires, the routes are considered unreachable and advertised as such until the
hold-down timer expires. Valid range for timer: 1 to 10,000 seconds; default: 180 seconds.
H
OLD
-D
OWN
T
IMER
While this timer is running, unreachable routes are advertised on other interfaces. This timer starts
when:
•
when:
•
the database timer for the route expires
•
a formerly reachable route changes to unreachable in an incoming response
•
a WAN circuit goes down
When this timer expires, and the unreachability information is communicated to all the reachable
WAN routers, this route is deleted. Valid range for timer: 1 to 10,000 seconds; default: 120 seconds.
WAN routers, this route is deleted. Valid range for timer: 1 to 10,000 seconds; default: 120 seconds.
R
ETRANSMISSION
T
IMER
This timer starts when an update request (or response) packet is sent out. If acknowledgment is not
received by the time this timer expires, the packet is retransmitted. Valid range for timer: 1 to 10,000
seconds; default: 5 seconds.
received by the time this timer expires, the packet is retransmitted. Valid range for timer: 1 to 10,000
seconds; default: 5 seconds.
M
AXIMUM
R
ETRANSMISSIONS
This provides a limit on the number of retransmission attempts for an update request (or response)
packet. Maximum number supported: 10.
packet. Maximum number supported: 10.
P
OLLING
T
IMER
This is the frequency (in minutes) in which the next-hop WAN router is polled with update
requests, once the maximum retransmission count threshold is exceeded. Polling takes place only
when there is a physical connection; polling does not initiate its own connection. Valid range for
timer: 1 to 10,000 seconds (165 minutes); default: 5 minutes.
requests, once the maximum retransmission count threshold is exceeded. Polling takes place only
when there is a physical connection; polling does not initiate its own connection. Valid range for
timer: 1 to 10,000 seconds (165 minutes); default: 5 minutes.
Global Triggered RIP/SAP Timers Options:
Current Settings
1) Database Timer 180 sec.
2) Hold Down Timer1 20 sec.
3) Retransmission Timer 5 sec.
4) Poll Timer 5 min.
5) Over Subscription Timer 180 sec.
6) Maximum Retransmissions 10
2) Hold Down Timer1 20 sec.
3) Retransmission Timer 5 sec.
4) Poll Timer 5 min.
5) Over Subscription Timer 180 sec.
6) Maximum Retransmissions 10
Select function or press <RET> for previous menu: