Enterasys csx150 Guia Do Utilizador
Small Office Remote Access Switch 301
C
ONFIGURING
C
ALL
C
ONTROL
Monthly Call Charge
more than 3 call attempts within 2 seconds. This prevents certain model switches from being
overloaded. In areas where these low capacity switches are not installed, calls can be made more
frequently.
overloaded. In areas where these low capacity switches are not installed, calls can be made more
frequently.
Before the system initiates a data connection, it first checks the time at which the last connection
was initiated. If the time from the last connection attempt to the new connection attempt is less than
the configured call interval, the new connection is placed on an outgoing call queue. The queue is
then serviced at the configured call interval.
was initiated. If the time from the last connection attempt to the new connection attempt is less than
the configured call interval, the new connection is placed on an outgoing call queue. The queue is
then serviced at the configured call interval.
M
ONTHLY
C
ALL
C
HARGE
C
ONFIGURING
M
ONTHLY
C
ALL
C
HARGE
U
SING
CFGEDIT
1.
Select Call Charges from the Call Control Options menu.
2.
Follow the onscreen instructions to enable this feature.
3.
Enter the maximum monthly charge you would like to set (specified in Yen for NTT
connections).
connections).
4.
Select the action to take if the maximum is exceeded.
M
ONTHLY
C
ALL
C
HARGE
C
ONFIGURATION
E
LEMENTS
S
TATUS
Allows you to enable or disable the monthly call charge option.
M
AXIMUM
M
ONTHLY
C
HARGE
The maximum monthly charge value. The legal values are from 1 to 10,000,000. This value is
specified according to the country’s currency.
specified according to the country’s currency.
A
CTION
Select the action to be taken if the maximum monthly call charge is exceeded. The Stop Calling
action will cause the system to stop initiating switched calls. Dedicated connections and incoming
calls will continue to operate normally. The continue calling action will cause the system to
continue making calls even after the maximum monthly charge is exceeded.
action will cause the system to stop initiating switched calls. Dedicated connections and incoming
calls will continue to operate normally. The continue calling action will cause the system to
continue making calls even after the maximum monthly charge is exceeded.
M
ONTHLY
C
ALL
C
HARGE
B
ACKGROUND
I
NFORMATION
Currently, this feature is only supported on connections to NTT, NET5, and 1TR6 switches. The
“Advice of Charge” information element delivered by the switches are required to track phone call
charges.
“Advice of Charge” information element delivered by the switches are required to track phone call
charges.
When the Monthly Call Charges option is enabled, phone call charges are tracked by the system. If
the total call charges exceed this configured maximum during the month, the configured action will
be taken. At the beginning of a new month, the current total call charges will be reset to 0.
the total call charges exceed this configured maximum during the month, the configured action will
be taken. At the beginning of a new month, the current total call charges will be reset to 0.