Enterasys csx150 Guia Do Utilizador

USER’S GUIDE

532      CyberSWITCH

TFTP C

OMMANDS

The TFTP feature and its commands are only available when IP routing is enabled. The TFTP 
feature and file access are enabled by default when the system software is installed. Using the 
Manage Mode, configuration changes may be made that will limit file access. The following TFTP 
commands are available:

tftp get

Allows you to perform the “TFTP GET” operation locally from the console through the TFTP 
Client function. The following is an example display of a TFTP GET screen.

tftp kill <session Id>

Allows you to kill a TFTP session. The session Id must be included in this command. To obtain 
the session Id, issue the

 tftp session

 command which displays the TFTP session 

information.

tftp put

Allows you to perform the TFTP PUT operation locally from the console through the TFTP 
Client function. The following is an example display of a TFTP PUT screen.

tftp session

Displays the TFTP session information of active TFTP sessions. To get detailed information on 
a specific session, enter the session’s Id number when prompted. You can not display the 

> TFTP GET

>IP Address of the Host containing the file
(<RET> to abort)? 19.233.45.33

>Enter the name of the local file to write (including the full path)?
(<RET> to abort)? \config\config.nei

>Enter the name of the remote file (including the full path)
(<RET> for same as local)? <RET>

Enter the mode (BIN [binary] or ASC [ascii])
<RET> for ascii? bin

Receiving File... Please wait
File Transfer Complete...

> TFTP PUT

>IP Address of the Host to receive the file
(<RET> to abort)? 19.233.45.33

>Enter the name of the local file to send (including the full path)
(<RET> to abort)? \config\config.nei

>Enter the name for the remote file (including the full path)
(<RET> for same as local)? <RET>

Enter the mode (BIN [binary] or ASC [ascii])
<RET> for ascii? bin

Sending File... Please wait
File Transfer Complete...