Enterasys 9f106-02 Guia De Referência
9F106-02 Module Specific Information
4
9F106-02 Module Specific Configuration Screen Fields
The following information appears on the 9F106-02 Configuration Screen.
(FNB-1) FNB Status
is an INSERTED/BYPASS toggle selection which allows you to
control whether or not the module’s FDDI-1 front panel ports will connect (insert) to
the backplane’s FNB-1 rings.
the backplane’s FNB-1 rings.
When set to INSERTED, the module’s FDDI-1 (B and A) ports insert directly into the
backplane’s FNB-1 primary and secondary rings, respectively.
backplane’s FNB-1 primary and secondary rings, respectively.
When set to BYPASS, the module’s FDDI-1 (B and A) ports do not connect to the
backplane. Therefore, no communications between the FDDI-1 front panel ports and
the backplane can occur.
backplane. Therefore, no communications between the FDDI-1 front panel ports and
the backplane can occur.
(FNB-1) AutoConnect
is an ENABLED/DISABLED toggle selection which allows
you to control whether or not the module’s FDDI-1 front panel ports (in INSERTED
status) and their corresponding FNB-1 rings will automatically connect only when an
active link is detected on the module’s FDDI-1 front panel port(s).
status) and their corresponding FNB-1 rings will automatically connect only when an
active link is detected on the module’s FDDI-1 front panel port(s).
When the (FNB-1) AutoConnect field is set to ENABLED, (and the FNB-1’s FNB
Status is set to INSERTED), then a connection between the module’s FDDI-1 front
panel ports and the backplane’s FNB-1 primary and secondary rings will occur
regardless of an active link being detected on the FDDI-1 front panel port(s).
Status is set to INSERTED), then a connection between the module’s FDDI-1 front
panel ports and the backplane’s FNB-1 primary and secondary rings will occur
regardless of an active link being detected on the FDDI-1 front panel port(s).
When the (FNB-1) AutoConnect field is set to DISABLED, (and the FNB-1’s FNB
Status is set to INSERTED), then a connection between the module’s FDDI-1 front
panel ports and the backplane’s FNB-1 primary and secondary rings exist only when
an active link is detected on the FDDI-1 front panel port(s).
Status is set to INSERTED), then a connection between the module’s FDDI-1 front
panel ports and the backplane’s FNB-1 primary and secondary rings exist only when
an active link is detected on the FDDI-1 front panel port(s).
(FNB-1) Port -A Status
displays the status (Link or No-Link) of the module’s FDDI-1
front panel A port.
(FNB-1) Port -A Type
identifies the type of FDDI Port Interface Module (FPIM) that
resides in the module’s FDDI-1 front panel A port.
(FNB-1) Port -B Status
displays the status (Link or No-Link) of the module’s FDDI-1
front panel B port.
(FNB-1) Port -B Type
identifies the type of FDDI Port Interface Module (FPIM) that
resides in the module’s FDDI-1 front panel B port.
B
A
FDDI-1
Backplane
FNB-1
INSERTED
Front Panel
B
A
FDDI-1
FNB-1
BYPASS
Backplane
Front Panel