Enterasys ssr-glx19-02 Guia Do Utilizador

Obtain IPX Forwarding information to display details about the routes of an SSR's IPX 
interfaces. To access such information, do one of the following:

•

In the Front Panel view, select the Monitor menu, choose Routing State, choose IPX 
State

, and then choose IPX Forwarding Table.

•

In the Schematic view, double-click the IPX Router function.

Uncompressed Tx

Indicates how many packets were sent without being 
compressed even though compression was turned on for the 
interface.

Compressed Rx

Indicates how many compressed packets were received.

Compressed Init Rx

Indicates how many compression initialization packets were 
received.

Compressed Rejected 
Rx

Indicates how many compressed packets received on the 
interface were rejected.

Uncompressed Rx

Indicates how many packets were received without being 
compressed even though data compression was enabled on 
the interface.

Media Type

Indicates that the interface is for an Ethernet network

IPX Network number

Identifies the IPX network number of the interface.

No of State Changes

Indicates how many times the interface has changed state.

Initialization failed 
times

Indicates how many times the interface failed to start.

Delay (mS)

Indicates how many milliseconds it takes to transmit one byte 
of data (excluding protocol headers) to a destination on the 
other end of the interface if there is no other traffic on that 
interface.

Throughput

Indicates how much data (in bits per second) may flow 
through the interface if there is no other traffic on that 
interface.

Neighbor Name

Identifies the name of the neighboring router located on a 
WAN.

Neighbor Network 
Number

Identifies the internal network number of the neighboring 
router located on a WAN.