Enterasys ssr-glx19-02 Guia Do Utilizador
CoreWatch User’s Manual
83
Chapter 6: Configuring SSR Bridging
Defining SmartTRUNK Settings for SSR Bridging
To set up the SSR to perform SmartTRUNKing:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file’s
Bridging Configuration object.
Bridging Configuration object.
3.
Double-click the Smart Trunking Configuration object.
4.
Click the Configure New Smart Trunking Port object.
Configuration Expert opens the ARP wizard:
5.
Click Next.
The Smart Trunking Name Entry panel appears:
Figure 34. Smart Trunking Name Entry panel
6.
Define the port(s) to be included in the SmartTRUNK by taking the following steps:
a.
In the Smart Trunking Port box, enter a name for the port you wish to assign to
the SmartTRUNK.
the SmartTRUNK.
The Smart Trunking port name is a string up to 32 characters long. You cannot
begin a Smart Trunking port name with an underscore ( _ ) or the prefix “SYS_.'
begin a Smart Trunking port name with an underscore ( _ ) or the prefix “SYS_.'
b. Specify the Load Policy by selecting either the Least Loaded or Round Robin option.
c.
Under Options, select either Protocol or Timeout. If you select the Protocol option,