Memorex mt1098 Manual Do Proprietário
18
TV OPERATION
To turn on the TV, press the TV POWER button.
The VOLUME can be adjusted to a desired level by
pressing the VOL (VOLUME) Up or Down button.
pressing the VOL (VOLUME) Up or Down button.
The sound level will be indicated on the TV screen by
green bars and a number. As the sound level
increases, so do the number of bars and the number on the
screen. The same is true for decreasing the level.
green bars and a number. As the sound level
increases, so do the number of bars and the number on the
screen. The same is true for decreasing the level.
CATV Mode Direct Channel Selection
When the TV/CATV menu option is in the CATV setting, channels can be selected as
follows:
When the TV/CATV menu option is in the CATV setting, channels can be selected as
follows:
1-9
Press "0" twice, then 1-9 as needed.
Example, to select channel 2, press "002".
Example, to select channel 2, press "002".
10-12
Press "0", then remaining 2 digits.
Example, to select channel 12, press "012".
Example, to select channel 12, press "012".
13-99
Press the 2 digits in order.
Example, to select channel 36, press "36".
Example, to select channel 36, press "36".
100-125
Press the 3 digits in order.
Example, to select channel 120, press "120".
Example, to select channel 120, press "120".
NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off
after 15 minutes.
1
2
3
4
Direct Channel Selection buttons (0-9) - Press these buttons to select a channel.
The channel number will appear on the upper right corner of the TV screen.
If an invalid channel number is selected, the display will revert to the original channel.
TV Mode Direct Channel Selection - When the TV/CATV menu option is in the TV
setting, all channels can be instantly selected by using two buttons.
(For example, to select channel 2, press "0", then "2". If you press only "2", channel
selection will be delayed for a few seconds). For channels 10 and above, press the 2
digits in order.
The channel number will appear on the upper right corner of the TV screen.
If an invalid channel number is selected, the display will revert to the original channel.
TV Mode Direct Channel Selection - When the TV/CATV menu option is in the TV
setting, all channels can be instantly selected by using two buttons.
(For example, to select channel 2, press "0", then "2". If you press only "2", channel
selection will be delayed for a few seconds). For channels 10 and above, press the 2
digits in order.
CH (CHANNEL) Up/Down buttons
Press and release the CH (CHANNEL) Up or Down button. The channel automatically
stops at the next channel set into memory. Press and hold the button down to change
channels more quickly.
Press and release the CH (CHANNEL) Up or Down button. The channel automatically
stops at the next channel set into memory. Press and hold the button down to change
channels more quickly.
TV - VHF/UHF channels
CATV - CABLE TV channels
CATV - CABLE TV channels
For proper operation, before selecting channels, they should be set into the TV's
memory. See "TO MEMORIZE CHANNELS".
memory. See "TO MEMORIZE CHANNELS".
Set the TV/CATV menu option to the desired setting. When shipped from the factory, this
menu option is in the TV setting. See page 20 "TO MEMORIZE CHANNELS".
menu option is in the TV setting. See page 20 "TO MEMORIZE CHANNELS".
VOLUME
32
3I50601A E/P18-27
9/3/01, 2:27 PM
18