Lenovo a70 7099 Guia Do Utilizador

Página de 192
11.
Position the heat sink fan duct on the top of the heat sink and fan assembly so
that the four screw holes in the heat sink fan duct are aligned with the
corresponding holes in the heat sink and fan assembly. Then, install the four
screws to secure the heat sink fan duct in place.
12.
To complete the replacement, go to “Completing the parts replacement” on
page 157.
Replacing the optical drive
Attention
Do not open your computer or attempt any repair before reading and understanding the
“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
http://www.lenovo.com/support
This section provides instructions on how to replace the optical drive.
To replace the optical drive, do the following:
1.
Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
2.
Remove the computer cover. See “Removing the computer cover” on page
122.
3.
Figure 59. Installing the heat sink fan duct
142
Hardware Maintenance Manual