Sceptre s6500 Guia Do Utilizador
Chapter 6: Expansion Options
95
Figure 6-9: Connecting the Notebook to the I/O Port Replicator
4. Gently slide the Notebook along the rails of the docking platform until the
Notebook’s 240-pinned connector makes a connection with the 240-pinned
port on the Replicator. If the Notebook does not slide in easily, remove it
from the docking platform, realign the grooves to the rails and try again.
port on the Replicator. If the Notebook does not slide in easily, remove it
from the docking platform, realign the grooves to the rails and try again.
5. Open the Notebook’s LCD cover and assuming you entered the system into
suspend mode in step 2, resume normal operation.
Removing the Notebook from the I/O Port Replicator
Refer to the following illustration and instructions to remove the Notebook
from the Port Replicator.
from the Port Replicator.
1. Save your data and enter your Notebook into the Suspend mode.
2. Pull both release levers in the direction of the arrows as illustrated in
Figure 6-10.
3. It is now safe to remove the Notebook.
4. Push the Release levers back down to their original position.