Sceptre s6500 Guia Do Utilizador

Página de 116
Notebook User’s Guide 
98 
Cleaning The Computer 
Cleaning The Case 
If the computer case becomes soiled, you can clean it.  Always make sure that 
the computer is turned off and the AC adapter is disconnected before cleaning 
the computer.  You can clean the case with a soft, preferably lint-free, cloth.  If 
necessary, you can use a mild detergent.  
Avoid any cleaner that has abrasives in it and DO NOT use cleaning solvents 
such as thinner, benzene, or isopropyl alcohol-based products.  Never spray 
anything directly onto the computer.  Always spray onto a cloth and then wipe 
the computer with that.  After cleaning, allow 30 minutes drying time. 
Caring for and Cleaning The LCD Display 
LCD screens are delicate devices that need careful handling.  Please pay 
attention to the following advice: 
= When you are not using the computer, keep the LCD screen closed to 
prevent dust from gathering on the display and on the keyboard.   
= Do not put your fingers or sharp objects directly on the surface and never 
spray cleaner directly onto the display. 
= Do not press on, or store any object on the cover when it is closed.  It may 
cause the LCD to break. 
= The LCD display panel is covered with glass.  You can clean the glass if it 
gets dirty the same way you would clean a computer monitor screen.  Wipe 
the LCD surface gently with a clean, soft tissue or a lint free cloth and if 
necessary some commercially available screen or glass cleaner.  It is better 
to avoid ammonia-based cleaners, however.  Always spray the cleaner 
directly onto the cloth; never spray cleaner directly onto the display. 
Caring for the Touch Pad 
Please pay attention to the following advice when using the Touch Pad: 
= Use your finger instead of a pen or other sharp object. 
= Ensure that your hands are clean and dry when using the Touch Pad to 
prevent oil and dirt build-up, which can impair the Touch Pad operation. 
= Use one finger only.  Touching more than one point on the pad at a time can 
cause erratic results. 
= Finger movement on the Touch Pad should be soft and light.  The Touch 
Pad is not pressure-sensitive and requires very little force.