Sceptre s6500 Guia Do Utilizador
Chapter 2: The BIOS Setup Program
27
When
the
MODEM
Port field is enabled, a scroll bar
appears. You need to use the arrow [
$] key to access
the rest of the fields.
This menu allows you to configure the Notebook’s IDE and FDD controllers,
serial and parallel ports, as well as, IR (infrared) and Audio modes. Each field
on this menu is covered below.
serial and parallel ports, as well as, IR (infrared) and Audio modes. Each field
on this menu is covered below.
IDE Controller
This field allows you to configure the IDE Controller for the Notebook’s
installed hard drives. Available options for this field are:
installed hard drives. Available options for this field are:
•
= Disabled
•
= Primary
•
= Both
When Both is selected for this field, the IDE Controller will recognize both a
primary and a secondary IDE channel. Select Disabled if no hard drives are
installed. It is recommended that you use the default value for this field.
primary and a secondary IDE channel. Select Disabled if no hard drives are
installed. It is recommended that you use the default value for this field.
The default value for this field is: Both
FDD Controller
This field allows you to configure the FDD Controller for the Notebook’s
floppy disk drive. Available options for this field are:
floppy disk drive. Available options for this field are:
•
= Disabled
•
= Enabled
Select Disabled if an FDD is not installed.
The default value for this field is: Enabled
Internal MPEG II (Only available if an MPEG II Card is Installed)
This field allows you to configure your system if you have an internal MPEG II
card installed. Available options for this field are:
card installed. Available options for this field are:
•
= Disabled
•
= Enabled
Select Disabled if you do not want to use the internal MPEG II card. This
allows you to use a PCMCIA compatible MPEG II card.
allows you to use a PCMCIA compatible MPEG II card.
The default value for this field is: Enabled