Sceptre x32bv-naga Guia Do Utilizador
SCEPTRE X32 HDTV User Manual
- 31 -
www.SCEPTRE.com
If You Want the Fair Connection with Composite…
1.
Make sure the power of X32 LCD HDTV and your set-top box is turned
off.
off.
2.
Obtain a Yellow Video Cable. Connect the Yellow Video connector to
both your set-top box and AV’s Yellow Video connector port on the back
of your X32 LCD HDTV.
both your set-top box and AV’s Yellow Video connector port on the back
of your X32 LCD HDTV.
3.
Obtain a RCA Audio Cable. Connect the white color connector to both
your set-top box and AV’s white connector port on the back of your X32
LCD HDTV.
your set-top box and AV’s white connector port on the back of your X32
LCD HDTV.
4.
Connect the red color connector to both your set-top box and AV’s red
connector port on the back of your X32 LCD HDTV.
connector port on the back of your X32 LCD HDTV.
5.
Turn on the X32 LCD HDTV and your set-top box.
6.
Use the remote control’s source button or the source button on the right
side of the TV to switch to AV (CVBS).
side of the TV to switch to AV (CVBS).
Please Note :
•
Make sure the yellow connector in the same group is not connected.
You can only connect either the S-Video port or the Yellow
Connector port. DO NOT CONNECT BOTH.
You can only connect either the S-Video port or the Yellow
Connector port. DO NOT CONNECT BOTH.
•
Please reference the set-top box’s manual as well, to make sure
the set-top box is configured to output correctly to the TV.
the set-top box is configured to output correctly to the TV.
•
Sceptre’s X32 LCD HDTV supports SONY’s universal remote
code. Please look up SONY’s codes in your universal remote’s
hand book.
code. Please look up SONY’s codes in your universal remote’s
hand book.