Lenovo d20 4158 Guia Do Utilizador
6.
From the Create array menu, select RAID level and press Enter.
Note:
Only the valid RAID levels will be active.
7.
Select the SAS RAID level you want (RAID 0, RAID 1, or RAID 5) and press
Enter.
Enter.
8.
From the Stripe size menu, you can change the stripe size or keep it as
default.
default.
9.
Type a proper array name in the Array name field.
10.
Select Next and press Enter. When prompted, press Y to complete the array
creation and RAID configuration.
creation and RAID configuration.
Configuring the Marvell BIOS Setup to set an optional hot
spare hard disk drive
spare hard disk drive
To configure the Marvell BIOS Setup to set an optional hot spare hard disk drive:
1.
1.
Turn on your computer and press Ctrl+M when prompted to enter the Marvell
BIOS Setup.
BIOS Setup.
2.
On the Marvell BIOS Setup screen, use the arrow keys to select RAID Config
and press Enter. The RAID Config menu opens.
and press Enter. The RAID Config menu opens.
3.
From the RAID Config menu, select Spare Management.
4.
Use the arrow keys to select the hard disk drive you want to set as an optional
hot spare hard disk drive.
hot spare hard disk drive.
5.
Use the arrow keys to select Next and press Enter.
6.
Press Y when prompted to set the optional hot spare hard disk drive.
Configuring the Marvell BIOS Setup to delete an optional hot
spare hard disk drive
spare hard disk drive
To configure the Marvell BIOS Setup to delete an optional hot spare hard disk
drive:
1.
drive:
1.
Turn on your computer and press Ctrl+M when prompted to enter the Marvell
BIOS Setup.
BIOS Setup.
2.
On the Marvell BIOS Setup screen, use the arrow keys to select RAID Config
and press Enter. The RAID Config menu opens.
and press Enter. The RAID Config menu opens.
3.
From the RAID Config menu, select Spare Management.
4.
Use the arrow keys to select the optional hot spare hard disk drive you want to
delete.
delete.
5.
Use the arrow keys to select Next and press Enter.
6.
Press Y when prompted to delete the optional hot spare hard disk drive.
Configuring the Marvell BIOS Setup to delete an array
To configure the Marvell BIOS Setup to delete an array:
1.
1.
Turn on your computer and press Ctrl+M when prompted to enter the Marvell
BIOS Setup.
BIOS Setup.
2.
On the Marvell BIOS Setup screen, use the arrow keys to select RAID Config
and press Enter. The RAID Config menu opens.
and press Enter. The RAID Config menu opens.
3.
From the RAID Config menu, select Delete array.
4.
Use the arrow keys and the Enter key to select the array you want to delete
from the list.
from the list.
5.
Use the arrow keys to select Next and press Enter.
28
User Guide