Lenovo c20 4262 Manual Do Equipamento
Deleting RAID volumes
This section describes how to use the Intel Matrix Storage Manager option ROM
Configuration Utility to delete RAID volumes.
1.
Configuration Utility to delete RAID volumes.
1.
Press Ctrl+I when prompted to enter the Intel Matrix Storage Manager option
ROM Configuration Utility.
ROM Configuration Utility.
2.
Use the arrow keys to select the RAID volume to be deleted, and press Delete.
3.
When prompted, press Y to confirm the deletion of the selected RAID volume.
4.
After deleting a RAID volume, you can:
v
Return to step 1 to delete additional RAID volumes.
v
See “Creating RAID volumes” on page 53 for RAID volume creation.
v
Use the arrow keys to select Exit and press Enter.
v
Use the arrow keys to select Reset Disks to Non-RAID, and press Enter.
a.
a.
Use the arrow keys and space to mark individual physical disks to be
reset.
reset.
b.
Use the space key to select, and then press Enter to complete the
selection.
selection.
c.
When prompted, press Y to confirm the reset action.
d.
After completing the Reset Disks to Non-RAID function, you can:
– Return to step 1 to delete additional RAID volumes.
– See “Creating RAID volumes” on page 53 for RAID volume creation.
– Use the arrow keys to select Exit and press Enter.
– Return to step 1 to delete additional RAID volumes.
– See “Creating RAID volumes” on page 53 for RAID volume creation.
– Use the arrow keys to select Exit and press Enter.
SUPPORTED SAS RAID configurations
This section provides information that is applicable only for a Windows
environment. For information about configuring RAID in a Linux
environment. For information about configuring RAID in a Linux
®
environment,
contact your Linux software provider.
The following RAID configurations are supported on the Lenovo ThinkStation:
v
RAID Level 0 – Striped disk array
– Two drives minimum.
– Better performance and no fault tolerance.
– Two drives minimum.
– Better performance and no fault tolerance.
v
RAID Level 1 – Mirrored disk array
– Two drives.
– Improved read performance and 100% redundancy.
– Two drives.
– Improved read performance and 100% redundancy.
v
RAID Level 1E (1 Enhanced)
– Three drives minimum
– Three drives minimum
- Can always recover from a single drive failure and, in some cases, can
recover from two drives.
- High Performance.
Configuring the system BIOS to enable SAS RAID
functionality
functionality
This section describes how to configure the system BIOS to enable SAS RAID
functionality.
1.
functionality.
1.
Press F1 to enter the system BIOS setup.
2.
Use the arrow keys on the keyboard to select Advanced, and press Enter.
3.
Use the arrow keys to select the LSI SAS Interface, and press Enter.
54
Hardware Maintenance Manual