Grandstream gxw-4004 Manual Do Utilizador
Grandstream Networks, Inc.
GXW400x User Manual
Page 18 of 36
Firmware 1.0.1.8
Last Updated: 5/2008
C
ONFIGURING
GXW400
X
W
ITH
WEB
BROWSER
The GXW400x has an embedded Web server that allows users to configure the GXW400x through a
Web browser such as Microsoft’s Internet Explorer or Mozilla Firefox
Web browser such as Microsoft’s Internet Explorer or Mozilla Firefox
A
CCESS THE
W
EB
C
ONFIGURATION
M
ENU
The GXW400x HTML configuration menu can be accessed via LAN or WAN port:
From the LAN port:
1. Directly connect a computer to the LAN port.
2. In Windows, open a ‘Command Prompt’ window
3. Type in “ipconfig /release”, the IP address etc. becomes 0.
4. Type in “ipconfig /renew”, the computer gets an IP address in 192.168.2.x segment by default
5. Open a web browser, type in the default gateway IP address.
http://192.168.2.1
. You will see the
login page of the device.
From the WAN port:
The WAN port HTML configuration option is disabled by default from factory. To access the HTML
configuration menu from the WAN port:
configuration menu from the WAN port:
1. Enable the “WAN Port Web Access” option via IVR option 12.
2. Find the WAN IP address of the GXW400x using voice prompt menu option 02.
3. Access the GXW400x Web Configuration page via WAN port using the following URL:
http://GXW400x -IP-Address
(the GXW400x IP-Address is the WAN IP address for the
GXW400x).
NOTE: If using a web browser to enter the configuration page, strip the leading “0”s because the browser
will parse in octet. (i.e. if the IP address is: 192.168.001.014, please type in: 192.168.1.14).
Once the HTTP request is entered and sent from a Web browser, the user will see a log in screen. There
are two default passwords for the login page:
are two default passwords for the login page:
User Level:
Password:
Web pages allowed:
End User Level
123
Only Status and Basic Settings
Administrator Level
admin
Browse all pages
Only an administrator can access the “ADVANCED SETTINGS” configuration page.
1. There are six different tabs (Status, Basic Settings, Advanced Settings, Profile 1, Profile 2 and
FXS Ports) on the top of the screen (after login). To open each page, click on the tab.
2. Click on Profile 1 to enter your SIP Server/ SIP Proxy/Registrar information. Enter the IP Address
(or FQDN) of the Server under: SIP Server and/or Outbound Proxy.
3. Click
on FXS ports to enter the extensions or account information. You will need to fill in the
following information for each extension. Once the extensions are configured, you are finished.
FXS
Port
Port
SIP User
ID
ID
Auth ID
Authentication
Password
Password
Name
Profile