Pantech breeze ii Manual Do Utilizador
Getting started
18
19
Installing/removing SIM card and
battery
1. Remove the battery
cover from the unit. To
fit the battery cover, put
it on the guide rail and
push up.
2. Insert the SIM card
into the slot. The gold
contacts of the SIM card
should go against the
metal contacts of the
phone.
Put the contacts of the
battery into the hole
located at the bottom of
the unit and then insert
and press the upper side of the battery
until you hear the “click”. Make sure you
align the gold contacts at the battery
end with contacts on the phone. If the
contacts at the battery are not properly
aligned, damage could occur to the
phone and the battery.
Incorrect
Correct
3. To remove the battery
push the bottom of the
battery to upwards (1)
and remove (2) the
battery.
Push the SIM card in the
arrow direction as shown.
To charge your battery
1. To charge, open the
protective cover on the
top right side and
connect the charger
adapter.
The arrow on the charger
has to face the top of the phone.
Incorrect
Correct
Incorrect
Correct
2. To remove the adapter
connection press the
adapter’s side buttons
(1) and pulling the
adapter away (2).