NEC FE791SB Manual Do Utilizador

 3

Figure A.1

To attach the FE monitor to your system, follow these instructions:

1. Turn off the power to your computer.
2. If necessary, install the display card into your system. For more information,

refer to the display card manual.

3. For the PC: Connect the 15-pin mini D-SUB of the captive signal cable to the

connector of the display card in your system (Figure A.1). Tighten all screws.

For the Mac: Connect the MultiSync FE

 

Macintosh cable adapter (not included)

to the monitor connector on the Macintosh (Figure B.1). Attach the 15-pin
mini D-SUB end of the captive signal cable to the MultiSync FE

 

Macintosh

cable adapter on the computer (Figure B.1). Tighten all screws.

4. For download information on the Windows

®

 95/98/Me/2000/XP INF file

for your MultiSync monitor, refer to the References section of this User’s
Manual.

5. Connect one end of the power cord to the MultiSync FE monitor and the other

end to the power outlet (Figure C.1).

6. Turn on the monitor (Figure D.1) and the computer.
NOTE: If you have any problems, please refer to the Troubleshooting section of

this User’s Manual.

Figure B.1

Captive Signal Cable

Captive Signal Cable

15-pin

mini

D-SUB

Mac Adapter

(Not Included)

MSFE791990991Manual.p65

8/29/02, 11:14 AM

3