UsGlobalSat bt-308 Guia Da Instalação

 

PAGE 3 OF 6 

 

Bluetooth Installation Quick-Start Guide_1.0  

3.  POCKET PC (WM5)  BLUETOOTH GPS SET-UP 

 

To set up a Bluetooth connection with your Globalsat GPS receiver, follow these steps: 

1. 

Tap the Bluetooth icon in the lower-right corner of the screen  

2. 

Check "Turn on Bluetooth"  

3. 

Check "Make this device discoverable to other devices"  

4. 

Select Devices Tab and Tap New Partnership    

5. 

Tap "BT-GPS-XXXXXX" icon with a yellow sphere enclosing a black question mark and 
select next 

6. 

Enter the Passkey Code (or PIN code) for the GPS receiver and select "OK" 

 

  (For the BT-308 passkey code is 2003 and for  the BT-338 & BT-328 GPS receivers it’s 0000) 

7. 

Check Serial Port followed by selecting "Finish"    

8. 

Select COM Ports tab and tap "New Outgoing Port"  

9. 

Select "BT-GPS-XXXXXX followed by selecting "Next"  

10.  Select the desired GPS COM port for your device (Secure Connection unchecked) followed 

by selecting "Finish"  

 The following instructions are intended for third party applications 

in need of a specific GPS communication port.  
•  Back on the Main Menu page, select Start->Settings->System->GPS->Programs->GPS 

Program Port-> COM “X”  

•  (NOTE1: “X” represents the communication port number ) 
•  (NOTE2: Use any of the available communication ports from the navigation program in 

•  Next, tap Hardware tab and select GPS Com port with Baud Rate set at 38400bps.  
•  Finally, tap Access and check Manage GPS automatically  

 
NOTE:  
In most cases, mapping and navigation software require you to manually configure the assigned COM 
port of the GPS receiver in order to properly communicate and retrieve the GPS data.  See your PDA’s 
User Guide for more details on assigned COM ports and you navigation User’s Guide on how to properly 
configure the GPS COM port to be read.