Sony VPL-HS1 Manual

Página de 152
11
 GB
Step 3: Adjusting the Picture Size and Position
C
onnection
s
 and 
Preparations
7
Adjust to correct the 
trapezoidal distortion.
When projecting from the side
Corrects the horizontal distortion. 
Press SIDE SHOT + or – so that the top edge of 
the picture becomes parallel to the bottom edge. 
If the left side is longer than the right side, press 
SIDE SHOT –.
Use SIDE SHOT +  if the right side is longer.
To fine-adjust the distortion, press 
M or m.
When projecting from the center
Corrects the vertical distortion.
Use the menu. Select V (vertical) with the 
KEYSTONE DIR setting in the INSTALL 
SETTING 
 menu. Next, adjust with the 
DIGIT KEYSTONE setting so that the left side 
of the picture becomes parallel to the right side. 
(
If the top edge of the picture is longer than the 
bottom edge, set to a plus value.
If the bottom edge is longer than the top edge, 
set to a minus value.
8
Adjust the focus again using 
the focus lever.
Picture
When projecting from 
the center
When projecting from 
the side
Screen
If you position the projector 
below the bottom of the 
screen, adjust so that the 
bottom edge of the picture 
fits the bottom edge of the 
screen. For the projector 
positioned above the 
bottom of the screen, 
adjust so that the top edge 
of the picture fits the top 
edge of the screen.
If you position the 
projector on the left side 
of the screen, adjust so 
that the left side of the 
picture fits the left side 
of the screen. For the 
projector positioned  on 
the right side, adjust so 
that the right side of the 
picture fits the right side 
of the screen.
Picture
Screen