EchoStar d-2510 ip viaccess Manual Do Utilizador

Note: To stop searching press the         key on the

Using the Auto Search option, the EchoStar D-2510IP
VIACCESS searches for all available channels(Radio an
d TV) on the currently selected satellite. The names of th
e found TV channels are shown on the left and the total n
umber of found TV and Radio channels are mentioned o
n the right.

A Satellite Master Antenna Television (SMATV) system
is intended for the distribution of  television and
sound signals to household in one or 6

 

more adjacent

buildings.

A SMATV System represents a means for sharing
the same resources among several users for satellite and
terrestrial reception, and  it is designed to perform
the adaptation of the satellite TV signals to the SMATV
channel characteristics.

This receiver has a SMATV-IF facility to operate with SMATV.
This configuration allows the direct distribution of the QPSK signal received from the satellite
to the SMATV-IF distribution network in the extended IF band (above 950 MHz).

Before you start, you have to check your condition whether it is possible to use this facility or not in your
 households. (You can ask your household supervisor.)

If this receiver is connected to a SMATV network, select  “SMATV Configuration”.
The most common alternatives for “Symbol rate” and “FEC” are already preprogrammed.
(When you need to change the  “Symbol rate” for the exceptional frequency, select as you know.)
Move to “Start Auto Search” and just press OK.
Then, the “Auto Search” procedure will start.

To cancel the processing while the  “Auto Search” is proceeding, press the MENU key.

19

×     27500   Ø

Index          Freq            SR            FEC           Polarity
   45           12670        22000          5/6             vertical

remote control or on the front panel. This
cancels the searches and the found channels
will be discarded. All other keys of the remote
are disabled during searching