Yamaha AVX-S80 Manual Do Proprietário
26
RECORDING
Recording adjustments and other operations are
performed from the recording components. Refer to the
operation instructions for these components.
performed from the recording components. Refer to the
operation instructions for these components.
1
Turn on the power of this system and all
connected component.
connected component.
2
Select the source component you want to
record from.
record from.
The procedure for selecting an input source is the
same as the one described in “BASIC PLAYBACK”
on page 19.
same as the one described in “BASIC PLAYBACK”
on page 19.
3
Start playback (or select a broadcast station)
on the source component.
on the source component.
4
Start recording on the recording component.
Notes
• Do a test recording before you start an actual recording.
• When this system is set in the standby mode, you cannot record
• When this system is set in the standby mode, you cannot record
between the components connected to this system.
• The setting of BASS BOOST, VOLUME, “5 L/R BALANCE”
on the SET MENU and DSP programs does not effect the
recorded material.
recorded material.
• The signal input from VCR IN is not output to VCR OUT.
• Check the copyright laws in your country to record from
• Check the copyright laws in your country to record from
records, CDs, radio, etc. Recording of copyrighted material
may infringe copyright laws.
may infringe copyright laws.
• It is not possible to record the sound effect created by this
system’s DSP processing.
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
■
Timer playback/recording
This system can perform playback or recording with an
external timer (not supplied). Refer to the operating
instructions for the component and the timer to be used.
external timer (not supplied). Refer to the operating
instructions for the component and the timer to be used.
Notes
• Stored data, such as input source, will be reflected when
playback or recording with the timer.
• If you do not want any sound output when recording with a
timer, turn the volume down.
E4-S80-19-26(6.29)b
02.6.29, 4:33 AM
26