Yamaha yht-10 Guia De Ligação
YHT-10 Quick-Con n ect Guide
4
Consumer Precautions
Read these precautions carefully before operating your
YHT-10 home theater system:
YHT-10 home theater system:
• Since the NS-A76 speakers can be wall mounted, it
is essential that they are firmly secured. Be sure to
consult a reliable source about the best type of
hanger for your particular wall’s construction.
Secure installation is the purchaser’s responsibility.
consult a reliable source about the best type of
hanger for your particular wall’s construction.
Secure installation is the purchaser’s responsibility.
• Do not attach the NS-A76 speakers to thin plywood
or soft wall surface materials as the screws may tear
free, causing the speakers to fall and be damaged, or
resulting in personal injury.
free, causing the speakers to fall and be damaged, or
resulting in personal injury.
• Do not fasten the NS-A76 speakers to walls with
nails, adhesives, or other unsafe hardware. Long-
term use and vibrations may cause them to pull free.
term use and vibrations may cause them to pull free.
• Do not place any speakers where they are liable to be
knocked over or struck by falling objects. Stable
placement will also ensure better sound performance.
placement will also ensure better sound performance.
• The NS-A636 and NS-AC2 speakers feature a
magnetically-shielded design, but there is still a
chance that placing them too close to a TV might
impair picture color. Should this happen, move the
speakers away from the TV.
chance that placing them too close to a TV might
impair picture color. Should this happen, move the
speakers away from the TV.
• Placing speakers on the same stand or shelf as a
turntable can result in feedback.
• Never touch the woofer or tweeter units with your
hand or expose them to excessive physical shock. If
they are dented or bent, the sound will be distorted.
they are dented or bent, the sound will be distorted.
• Lower the R-V502 receiver volume control before
changing input sources. Never change input sources
(for example, FM to CD) at high listening levels.
Always turn the R-V502 receiver unit off when
installing or removing input cables.
(for example, FM to CD) at high listening levels.
Always turn the R-V502 receiver unit off when
installing or removing input cables.
• Any time you note distortion, reduce the volume control
on the R-V502 receiver to a lower setting. Never allow
your power amplifier to be driven into “clipping.”
your power amplifier to be driven into “clipping.”
• Do not attempt to clean the speakers with chemical
solvents, as this might damage the finish. To clean,
wipe with a dry, soft cloth.
wipe with a dry, soft cloth.
• To prevent the enclosure from warping or discolor-
ing, do not place the speakers where they will be
exposed to direct sunlight or excessive humidity.
exposed to direct sunlight or excessive humidity.
Specifications
MODEL:
NS-A636
NS-AC2
NS-A76
QUANTITY:
2
1
2
TYPE:
Bookshelf Speaker
Center-Channel Speaker
Surround, Effects (Pair)
SPEAKER COMPLEMENT:
Magnetically-shielded
Magnetically-shielded
–
8" Woofer
2" x 5" Cone Woofer
5" Full-Range Driver
4" Ferro-Fluid Cooled Midrange –
–
3/4" Dome-Type Tweeter
2" Cone Tweeter
–
SENSITIVITY
:
91 dB/1 W/1 m
90 dB/1 W/1 m
89 dB/1 W/1 m
FREQUENCY RESPONSE:
90 Hz ~ 20 kHz (+ 3 dB)
70 Hz ~ 20 kHz
95 Hz ~ 13 kHz
NOMINAL IMPEDANCE:
8
Ω
8
Ω
6
Ω
MIN. AMPLIFIER POWER:
10 W
10 W
5 W
MAX. AMPLIFIER POWER:
140 W
80 W
60 W
DIMENSIONS:
16 3 ⁄ 16" H x 10 1 ⁄ 2" W
5 1 ⁄ 4" H x 18 1 ⁄ 8" W
9" H x 6 1 ⁄ 2" W
x 12 1 ⁄ 2" D
x 5 1 ⁄ 4" D
x 4 3 ⁄ 4" D
WEIGHT:
34 lb pair (boxed)
13 lb (boxed with NS-A76) 13 lb (boxed with NS-AC2)
©1997 YAMAHA ELECTRONICS CORPORATION, USA
6660 Orangethorpe Avenue, Buena Park, CA 90620
PH: (714) 522-9105; FAX: (800) 634-0355
http://www.yamaha.com