Yamaha HTR-5590 Manual Do Proprietário

■ Special considerations when

The DTS signal is a digital bitstream. Therefore, if you
attempt to send the DTS signal to the second room, you
will only be able to hear the digital noise sound that could
damage your speakers.

Due to this characteristic of DTS encoded discs, the
following considerations and adjustments need to be
made.

For LDs or DVDs encoded with DTS
Only 2-channel analog audio signals may be sent to the
second room, as follows:
•

LDs
Set your LD player’s left and right outputs to the
analog soundtrack.

•

DVDs
Use the disc menu to set the DVD player’s mixed 2-
channel left and right audio outputs to the PCM or
Dolby Digital soundtrack.

For CDs encoded with DTS
DO NOT USE the Zone 2 feature for CDs encoded with
DTS to avoid unexpected noise.

In the second room (Zone 2), the supplied remote control
can be used for the Zone 2 remote control. You can select
the input source and control the component which is
located in the main room directly from the second room
regardless of the listening condition in the main room.

1

2

Press j / i to select “L:AMP”.

3

Press u / d to select “Zone2”.

4

5

Press SELECT k to display “ZONE2” in the
display window.

6

Press an input selector button to select the
input source you want to watch or listen to
in the second room.
The display window shows “2: name of selected
input” if the remote control is in the Zone 2 mode.

• The SYSTEM POWER, STANDBY and MUTE button on the

remote control works for the second room. However Zone 2
volume cannot be adjusted with the remote control. Use the
control on the amplifier in the second room.

7

8

Press SELECT k / n to exit from the Zone 2
mode.

TV VOL

PRESET

PRESET

TV MUTE

TV  VOL

SELECT

CH

CH

+

+

–

–

TV VOL

PRESET

PRESET

TV MUTE

TV  VOL

SELECT

CH

CH

+

+

–

–

LEARN