Yamaha HTR-5990 Guia Do Utilizador

Use to manually adjust the optional system settings.

■ Display set  A)DISPLAY SET
Use this feature to adjust the display settings.

The parameter settings for DISPLAY SET (except for the 
DIMMER setting) can be initialized to the factory presets. Use 
the V-RESET feature in the ADVANCED SETUP menu (see 
page 89).

DIMMER

Use to adjust the brightness of the front panel display.
Choices: –4 to 0

OSD SHIFT

Use to adjust the vertical position of the OSD.
Choices: +5 (downward) to –5 (upward)
Initial setting: 0
• Press h to lower the position of the OSD.
• Press l to raise the position of the OSD.

GRAY BACK

Choices: AUTO, OFF
• Select AUTO to display a gray background in the OSD 

when there is no video signal being input.

• Select OFF not to display a gray background even 

when there is no video signal being input.

V CONV.

Use this feature to activate or deactivate the component 
interlace/progressive conversion as well as the HDMI 
interlace/progressive up-conversion of the analog video 
signals input at the composite video, S-video and 
component video jacks.
Choices: ON, OFF
• Select ON to activate the component interlace/

progressive conversion as well as the HDMI interlace/
progressive up-conversion of the analog video signals.

• Select OFF to deactivate the component interlace/

progressive conversion as well as the HDMI interlace/
progressive up-conversion of the analog video signals.

y

When using the THX system, we recommend setting V CONV. to 
OFF.

• The OSD is not displayed when V CONV. is set to OFF.
• Even when V CONV. is set to ON, HDMI digital signals are not 

converted to analog video signals.

• If V CONV. is set to OFF, the CMPNT I/P and HDMI I/P 

features are deactivated.

• Converted video signals are only output at the MONITOR OUT 

jacks. When recording you must make the same type of video 
connections (composite or S-video) between each component.

• When converting composite video or S-video signals from a 

VCR to component video signals, the picture quality may suffer 
depending on your VCR.

• Unconventional signals input at the composite video, S-video or 

component video jacks cannot be converted even if V CONV. is 
set to ON.

• If unconventional signals are being input at the composite 

video, S-video or component video jacks, the video output may 
be abnormal as a result. In such cases, set V CONV. to OFF.

Component interlace/progressive conversion
CMPNT I/P
Use this feature to activate or deactivate the analog I/P 
conversion of the analog video signals input at the 
composite video, S-video and component video jacks so 
that the analog video signals deinterlaced from 480i to 
480p are output at the MONITOR OUT jacks.
Choices: ON, OFF
• Select ON to activate the analog I/P conversion of the 

analog video signals.

• Select OFF to deactivate the analog I/P conversion of 

the analog video signals.

• This menu item is not available and hence not visible in the 

OSD if V CONV. is set to OFF.

• If your video monitor does not support the analog video signals 

with 480p of resolution, the SET MENU items may not be 
displayed on your video monitor when CMPNT I/P is set to 
ON.

. A)DISPLAYSET

B)MEMORY GUARD
C)AUDIO SELECT
D)DECODER MODE

4 OPTION MENU 1/2

[]/[]:Up/Down
[ENTER]:Enter

p

p

. E)PARAM. INI

F)ZONE SET
G)XM RADIO SET

4 OPTION MENU 2/2

[]/[]:Up/Down
[ENTER]:Enter

p

p

. DIMMER;;;;;;;0

OSD SHIFT

;;;;0

GRAY BACK

;AUTO

V CONV.

;;;;;ON

A)DISPLAY SET

[]/[]:Up/Down
[<]/[>]:Adjust

p

p