Yamaha RP-U100 Manual Do Proprietário

10

This section explains how to turn on the 
RP-U100 and select input sources.
If any external audio equipment is con-
nected to the RP-U100, turn it on first. 

on the RP-U100. 
The message “Hello” appears for 
a few seconds, and the RP-U100 
returns to the state in which it was last 
used (e.g., the input source that was 
selected when the RP-U100 was turned 
off is selected).

• PC
Press the PC key repeatedly to select the 
following PC inputs: USB, PC_DG, and 
PC_AN. USB select the USB port, PC_DG 
selects the DIGITAL PC COAX IN and 
DIGITAL PC OPT IN, and PC_AN selects 
the ANALOG PC IN.

Note: The DIGITAL PC OPT IN has 
priority over the DIGITAL PC COAX 

IN, so if you connect to both inputs, the 
signal received at the DIGITAL PC 
OPT IN is used.

• AUX1
Press the AUX1 key to select the equip-
ment connected to the ANALOG AUX 1 
IN or DIGITAL AUX 1 OPT IN connector 
as the input source. 

Note: The DIGITAL AUX 1 OPT IN 
has priority over the ANALOG AUX 1 
IN, so if you connect to both inputs, the 
signal received at the DIGITAL AUX 1 
OPT IN is used.

• AUX2
Press the AUX2 key to select the equip-
ment connected to the ANALOG AUX 2 
IN connectors as the input source.

• TUNER
Press this key repeatedly to select the fol-
lowing tuner bands: FM Auto Stereo, FM 
Mono, or AM.

See page 11 for more information 
about using the tuner.

P C _ A N

P C _ D G

U S B

D G

PC (digital)

PC (analog)

PC

i

USB

j

9 2 . 5 0