Yamaha RP-U100 Manual Do Proprietário

Opening Page

5/68 ページ

For USB capture, analog signals input to the analog jacks on the RP-U100 are 
subjected to analog/digital (A/D) conversion and then output in digital form via the 
USB link to a personal computer. This function allows the digital data to be 
recorded on the computer, using an application such as a sound recorder.

Which input jacks are used for data capture depends on the mode selected with 
the input selector.

Input selector details

AUX1

AUX1 - ANALOG jack

AUX2

AUX2 - ANALOG jack

TUNER

Internal tuner signal

The USB capture function is not available in PC input mode.

The RP-U100 Application does not include a recording function. Please use 
appropriate recording software installed on the computer. For information on how 
to use the software, please refer to its documentation.
The sound recorded with the USB capture function is the original sound of the 
input signal. The effects of the DSP sound field programs of the RP-U100 are not 
recorded.
The data format supplied to the computer is 44.1 kHz, 16 bit, stereo. Make sure 
that the recording software is set up properly to handle this format.
While making a recording using USB capture, you should close all other applications 
running on the computer. Otherwise recording quality may be poor.

Digital input signals cannot be captured.
If data capture is activated while using the AUX1 - DIGITAL inputs, the RP-U100 
automatically switches to the AUX1 - ANALOG inputs. After capture has ended, 
the setting automatically returns to the AUX1 - DIGITAL inputs.