Yamaha RP-U100 Manual Do Proprietário

Opening Page

8/68 ページ

1 Plug the power cable of the RP-U100 into an AC outlet to set the unit to On or 

Standby.

2 Start up the computer.

3 Connect the RP-U100 and computer with the USB cable.

1 Open Multimedia from the Windows Control Panel and select the Audio tag.

to open the Audio tag on the control panel.

Click here 

2 Select "YAMAHA RP-U100 USB Audio" as the "Preferred Device" for playback and 

recording.

3 Start up the application and check that the RP-U100 is controlled by the application.
4 Play some audio on the computer (CD, MIDI, WAVE, etc.) and confirm that the RP-U100 

reproduces the sound.

1 Set the RP-U100 to Standby or Off.
2 Turn off the power to the computer.

3 Disconnect the USB cable linking the RP-U100 with the computer.

This is as the main panel of the Application.

Allows you to switch the RP-U100 on and off, control basic functions, and access various 

other panels.

Details