Yamaha RP-U100 Manual Do Proprietário

Opening Page

24/68 ページ

USB

This position serves for playing back a digital audio signal from the 
computer supplied to the RP-U100 via the USB link.
To use this position, the USB cable must be connected between 
the PC and the RP-U100, and appropriate settings must be made 
on the computer to output the audio signal.

USB connection details

DIGITAL

This position serves for playing back a digital audio signal from the 
computer supplied to the RP-U100 via the digital input jacks.
Both optical and coaxial jacks are provided. The RP-U100 
performs automatic switching by hardware, giving priority to the 
optical input.

ANALOG

This position serves for playing back an analog audio signal from the 
computer supplied to the RP-U100 via the analog input jacks.

The USB capture function is not available in PC input mode.

USB capture details

This mode serves for playing back the external input signal. There are digital (optical) 
and analog signal input jacks. Automatic switching gives priority to digital signals. 

In AUX1 mode, the signal that will be recorded by USB capture is the signal input 
from the AUX1 - ANALOG input jacks on the main unit. If AUX1 - DIGITAL was 
selected, the RP-U100 will automatically switch over to AUX1 - ANALOG.

Also when the USB MIX LEVEL setting is active, the mixed signal from a computer 

connected with the USB cable cannot be captured. 

USB capture details