Yamaha RX-SL80 Manual Do Proprietário

AUTO

Automatically selects input signals in 
the following order:
1) Digital signals*
2) Analog signals

DTS

Selects only digital signals encoded in 
DTS. If no DTS signals are input, no 
sound is output.

ANALOG

Selects only analog signals. If no 
analog signals are input, no sound is 
output.

* If this unit detects a Dolby Digital or DTS signal, the 

decoder automatically switches to the appropriate sound 
field program.

y

You can adjust the default input mode this unit selects when the 
power is turned on with the SETTING parameter in INPUT 
MODE (see page 42).

• When the SETTING parameter in INPUT MODE is set to 

“FIX”, you cannot switch the input mode by pressing INPUT 
(see page 42).

• When playing a disc encoded with Dolby Digital or DTS on 

some LD or DVD players, there is a delay in sound output for a 
moment when playback resumes after a search, because the unit 
must select the digital signal again.

• When playing an LD source that has not been digitally 

recorded, the unit may not output any sound for some LD 
players. In this case, set the input mode to Analog.

• If you attempt to search (forward or backward) during playback 

of a DTS-encoded disc, noise may occur periodically. If this 
happens, set the input mode to DTS.

• When you play DTS-encoded CD/LDs with the input mode set 

to AUTO, this unit automatically switches to the DTS decoding 
mode. The unit remains in DTS mode (and the t indicator 
may flash) for a few seconds after playback of the DTS source 
is complete. To manually release the DTS mode, press INPUT 
MODE to reselect AUTO.

• If the digital output data of the player has been processed in any 

way, you may not be able to perform DTS decoding even if you 
make a digital connection between this unit and the player.

■

You can display the type, format and sampling frequency 
of the current input signal.

STRAIGHT

(Format)

Signal format display. When the unit 
cannot detect a digital signal it 
automatically switches to analog input.

in

Number of source channels in the input 
signal. For example, a multi-channel 
soundtrack with 3 front channels, 2 
surround channels and LFE, is 
displayed as “3/2/LFE”.

fs

Sampling frequency. When the unit is 
unable to detect the sampling 
frequency “Unknown” appears.

rate

Bit rate. When the unit is unable to 
detect the bit rate “Unknown” appears.

flg

Flag data encoded with DTS or Dolby 
Digital signals that cue this unit to 
automatically switch decoders.