Yamaha RX-SL80 Manual Do Proprietário

You can enjoy good quality sound with the factory-set 
parameters. Although you do not have to change the initial 
settings, you can change some of the parameters to better 
suit the input source or your listening room.
Use the remote control to access and adjust each 
parameter.

y

You can change SET MENU parameters while the unit is 
reproducing sound.

You cannot change some SET MENU parameters while the unit 
is in either cinema or music night listening mode.

“SET MENU” is displayed on both the monitor and 
front panel of this unit.
The explanations in this document are based on the 
Screen Menu. The characters shown in the front panel 
display may differ from those on the Screen Menu.

• The number of levels each menu contains may 

differ. If the menu you selected contains a sub 
menu, press ENTER to enter the desired sub menu.

• Press TEST/RETURN to return to the upper level 

menu.

You cannot change parameter values when Memory Guard is set 
to “ON”. If you want to change the parameter values, set Memory 
Guard to “OFF” (see page 43).

s

w

e

f

b

–

+

p

d

a

u

–

+

The memory back-up circuit prevents the stored data 
from being lost even if this unit is set in the standby 
mode, the power cord is disconnected from the AC 
outlet, or the power supply is temporarily cut due to 
power failure. However, if the power is cut for more 
than one week, the parameter values will return to the 
factory settings. If this happens, edit the parameter 
value again.