Yamaha RX-V1065 Guia Do Utilizador

Rotate the RINPUT selector (or press 
dInput selection key) to select an input 
source.
The name of the selected input source is displayed for 
a few seconds.

y

• You can also select an input source from the GUI screen (page 23).
• You can change the input source name displayed on the front panel 

display or GUI screen as necessary (page 60).

Play the external component that you have 
selected as the source input, or select a radio 
station on the tuner.
Refer to the operating instructions of the external 
component for details on playback. For selecting 
radio stations or playback of an iPod, Bluetooth 
component or USB storage device using this unit, see 
the following.
• FM/AM radio tuning (page 29)
• iPod playback (page 42)
• Bluetooth component playback (page 44)
• USB storage device playback (page 45)

Turn the JVOLUME control (or press 
sVOLUME +/–) to adjust the volume.

This unit has a SCENE function that allows you to change 
input sources and sound field programs with one key. Four 
scenes are available for different usages, such as playing 
movies or music. The following input sources and sound 
field programs are provided as the initial factory settings.

y

• When this unit is on standby, you can turn on this unit by pressing 

PSCENE (or hSCENE).

• If you connect a Yamaha DVD/CD player that has the capability of the 

SCENE control signals to the REMOTE OUT jack of this unit, you can 
start playback on the player by using the SCENE function.

Press PSCENE (or hSCENE).

y

• You can also select a SCENE from the GUI screen (page 23).

AV1 

When you play back a DTS-CD, noise may be output in some 

conditions, which may cause a speaker malfunction. Make sure 

that the volume is set to low before starting playback. If noise is 

output, do the following.

1) When only noise is output
If a DTS bitstream signal is not properly input to this unit, 
only noise is output. Connect the playback component to this 
unit by digital connection and play back the DTS-CD. If the 
condition is not improved, the problem may results from the 
playback component. Consult the manufacturer of the 
playback component.

2) When noise is output during playback or skip operation
Before playing back the DTS-CD, display the Option menu 
after selecting the input source and set “Decoder Mode” to 
“DTS” (page 48).

HDMI 1

Straight

AV 1

Straight

AV 3

Straight

TUNER

7ch Enhancer

Volume-18.5dB