Yamaha RX-V1500 Manual Do Proprietário

■

The name of the selected program appears in the front 
panel display and video monitor.

y

Choose a sound field program based on your listening preference, 
and not on the name of the program.

• When you select an input source, this unit automatically selects 

the last sound field program used with that source.

• Sound field programs cannot be selected when the MULTI CH 

INPUT is selected.

■

You can adjust the bass/treble 
balance for the front left/right and 
center channels.
Press TONE CONTROL 
repeatedly on the front panel to 
select TREBLE or BASS.
Select TREBLE, then rotate 
PROGRAM to the right or left to 
increase or decrease the high-
frequency response.

Select BASS, then rotate PROGRAM to the right or left to 
increase or decrease the low-frequency response.
To cancel the tone control, press TONE CONTROL 
repeatedly to select BYPASS.

• If you increase or decrease the high-frequency or the low-

frequency sound to an extreme level, the tonal quality of the 
surround speakers may not match that of the front left/right and 
center speakers.

• TONE CONTROL is not effective when THX (page 46) or 

PURE DIRECT (page 37) is selected, or when MULTI CH 
INPUT is selected.

• TONE CONTROL is not effective for headphones. Use HP 

TONE CTRL to adjust bass/treble balance for the headphones 
(page 59).

■

Press MUTE on the remote control. 
The MUTE indicator flashes in the 
front panel display.
To resume the audio output, press 
MUTE again. (or press VOL –/+). The MUTE indicator 
disappears from the display.

y

You can adjust the muting level (see page 59).

■

“SILENT CINEMA” allows you to enjoy multi-channel 
music or movie sound, including Dolby Digital and DTS 
surround, through ordinary headphones. “SILENT 
CINEMA” activates automatically whenever you connect 
headphones to the PHONES jack while listening to 
CINEMA DSP or HiFi DSP sound field programs. When 
activated, the “SILENT CINEMA” indicator lights up in 
the front panel display.

• This unit will not be set to “SILENT CINEMA” when MULTI 

CH INPUT is selected as the input source.

• “SILENT CINEMA” is not effective when PURE DIRECT or a 

2ch stereo program is selected, or in STRAIGHT mode.

+10

   JAZZ CLUB

+10