Yamaha RX-V1600 Manual Do Proprietário

■ MACRO operations

• When you have finished using the MACRO feature, set 

MACRO ON/OFF to OFF.

• While the remote is carrying out a MACRO program, it will not 

accept any other button’s function until the macro operation is 
complete (the transmission indicator stops flashing).

• Continue to aim the remote control at the component the macro 

is operating until the macro operation is complete.

■ Programming MACRO operations
You can program your own macro and use the MACRO 
feature to transmit several remote control commands in 
sequence at the press of a button. Be sure to set up remote 
control codes or perform learning operations before 
programming the macro. We do not recommend 
programming continuous operations such as volume 
control in a macro.

• The default macro is not cleared when a new macro is 

programmed for a button. The default macro can be used again 
when the programmed macro is cleared.

• It is not possible to add a new signal (macro step) to the default 

macro. Programming a macro changes all macro contents.

Press MACRO using a ballpoint pen or 
similar object.
“MCR ?” appears in the display window.

If you do not complete each of the following steps within 30 
seconds, the macro programming mode will be 
automatically canceled. In this case, press MACRO again.

Press the macro button you want to use to 
operate the macro.
The macro button name (ex. M;DVD) and the 
selected component name (ex. DVD) appear 
alternately in the display window.

AGAIN appears in the display window if you press a button 
other than a macro button.

MACRO