Yamaha RX-V2500 Manual Do Proprietário

This unit comes with a variety of input jacks. Do the 
following to select the type of input signal you want to 
use.

AUTO

Automatically selects input signals in 
the following order:
1) Digital signals

*

2) Analog signals

DTS

Selects only digital signals encoded in 
DTS. If no DTS signals are input, no 
sound is output.

ANALOG

Selects only analog signals. If no 
analog signals are input, no sound is 
output.

* If this unit detects a Dolby Digital or DTS signal, the 

decoder automatically switches to the appropriate sound 
field program.

y

• You can adjust the default input mode this unit selects when the 

power is turned on (see page 64).

• DTS mode is recommended for playback of a CD or LD 

encoded in DTS.

If the digital output data of the player has been processed in any 
way, you may not be able to perform DTS decoding even if you 
make a digital connection between this unit and the player.

■

You can display the type, format and sampling frequency 
of the current input signal.

n

Format

Signal format display. When the unit 
cannot detect a digital signal it 
automatically switches to analog input.

Sampling

Sampling frequency. When the unit is 
unable to detect the sampling 
frequency “?” appears.

Channel

Number of source channels in the input 
signal. For example, a multi-channel 
soundtrack with 3 front channels, 2 
surround channels and LFE, is 
displayed as “3/2/0.1”.

Dialogue

Dialogue normalization information 
for Dolby Digital signals.

Bitrate

Bit rate. When the unit is unable to 
detect the bit rate “– – –” appears.

Flag1/Flag2 Flag data encoded with DTS or Dolby 

Digital signals that cue this unit to 
automatically switch decoders.

  DVD AUTO

00_RX-V2500U_EN.book  Page 39  Friday, August 20, 2004  5:20 PM